Marin Alpine Trail E2 2024

Description

The Marin Alpine Trail E2 is our top-end Alpine Trail, ready to tame the roughest and toughest of trails. For the best of the bunch, we’ve packed in the big-dog Shimano STEPs EP801 system and a long-lasting 630Wh battery, Fox 38/Float DHX2 Performance Elite suspension and a blend of Shimano XT and SLX 12-speed, including powerful 4-piston brakes.

Marin Alpine Trail E2 Specs:

Frame and Fork:

• Frame: Series 4 Alloy, 150mm MultiTrac Suspension, Integrated Battery/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor

• Fork: Fox 38 Performance Elite, 160mm travel, 29″ , 110x15mm Boost Kabolt Thru-Axle, 44mm Offset, Integrated Fox Fender
• Shock: Fox DHX2, Performance Elite, Low Speed Compression and Rebound Adjustment, 205x65mm, Trunnion Upper Mount, 25mmxM8 Lower Mount, S/M Spring Rate = 350lb, L/XL Spring Rate = 450lb

Wheels:

• Rims: Front: Marin Aluminum Double Wall, 29″ Diameter, 32mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible; Rear: Marin Aluminum Double Wall, 27.5″ Diameter, 38mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible
• Front Hub: Shimano FH-TC500, 110x15mm, Centerlock, 32H
• Rear Hub: Shimano FH-TC500MSB, 148x12mm, Disc, MicroSpline Freehub Body
• Spokes: 14g Stainless Steel
• Tyres: Front: Vee Tire Co. Attack HPL, 29×2.5″, Top 40 Tubeless Compatible Rear: Vee Tire Co. Crown Gem, 27.5×2.8”, TACKEE Compound, Tubeless Compatible

Drivetrain:

• Rear Derailleur: Shimano XT 12 speed, SGS
• Shift Lever:  Shimano SLX 12 speed, I-Spec EV
• Crankset: Shimano XT M8150, 160mm Length, 38t Chainring
• Chain: KMC E12S, eMTB-Specific Chain
• Cassette: Sunrace 12-Speed Micro-Spline, 10-51T

Brake System:

• Front Brake: TRP DH-R EVO 4-Piston Hydraulic, 203mm Rotor, 2.3mm Thick Rotor
• Rear Brake: TRP DH-R EVO 4-Piston Hydraulic, 203mm Rotor, 2.3mm Thick Rotor, with Magne
• Brake Levers: TRP DH-R EVO

Cockpit:

• Handlebars: Marin Trail, 35mm Clamp, 7000 Alloy Bar, 800mm Length, 20mm Rise, 5 Degree Up, 8 Degree Back
• Stem: Marin CNC, 35mm Length, 35mm Bar Bore
• Grips: Marin Grizzly Lock on
• Headset: FSA No 57E, Sealed Cartridge Bearings, 1 1/8” x 1 1/2”

Finishing Kit:

• Seatpost: X-Fusion Manic, 1x Composite Remote, Size S 125mm Travel, Size M and L 150mm Travel, Size XL 170mm Travel, 30.9mm
• Saddle: Marin eMTB

Electrics:

• Motor: Shimano Steps EP801 Drive Unit, 250W, 85Nm
• Battery: Shimano BT-EN806, Internal 630Wh
• Display: Shimano SC-E600
• Switch: SW-EN7000, Left Hand Switch For Assist Mode Change

 

• Extras: Shimano Battery Charger EC-E6002, Shimano CS-EN800 Chainguide, CushCore, 29″ Pro Front, Plus Rear, with CushCore Valve Stems, Marin Tire Sealant 300ml, Squeeze Top with Valve Core Removal Tool Cap

Could also be upgraded by adding some Hope F22 pedals for a smooth, grippy ride that will never let you down!